Short answerThe Trak Racer TR8 Pro V2 is the pick if you want a rigid cockpit without assembling aluminum profile: Trak Racer says its 2-inch steel tube takes up to 30 Nm of direct drive torque without flex and builds in about 45 minutes. It cost $594.15 on Nov 21, 2026 as a frame with seat slider rails and brackets, no seat.
Who it's for, and who should skip it
Buy it if
- You run or plan a base between 9 and 25 Nm and want the frame rating in writing
- You would rather tighten 30 bolts than 150: tube frames go together fast
- You like the look of a welded frame and easy entry from the side
Skip it if
- You want to keep adding parts for years: tube takes the mounts made for it, profile takes anything
- You need formula seating: the Alpine Racing TRX is the Trak Racer tube rig for that
- You are short on budget: with a seat this is an $850 cockpit
The verdict in three lines
- 30 Nm is the highest maker-stated torque figure of any steel tube rig in our catalog.
- Seat slider rails, oversized seat brackets and a gear shifter mount are included, which a bare profile frame often charges for.
- The catch: fewer upgrade options than profile, and no published footprint.
Will it fit your room, and will you fit in it?
| Fit check | Trak Racer TR8 Pro |
|---|---|
| Footprint L x W x H | Not stated |
| Floor area | Not stated |
| Folded size | Does not fold |
| Weight | Not stated |
| Driver height | Not stated |
| Max driver weight | Not stated |
| Seat | Not included |
| Folds | No |
Trak Racer calls the TR8 Pro a small-footprint rig "to fit well in most small spaces" but does not print the length and width on the US product page. As with the TR80S, our footprint sub-score sits at a neutral 6 for that reason.
The wheel mount slides for reach and the pedal plate adjusts, and the seat brackets are sized for most fiberglass bucket seats. Optional brackets cover office-style and car-style reclining seats.
Which wheel base can it take?
Trak Racer says the 2-inch tube was strengthened to take up to 30 Nm of direct drive torque without flex.
| Wheel base class | On the TR8 Pro |
|---|---|
| Up to 6 Nm (Logitech G923, MOZA R3 and R5, Thrustmaster T598) | Yes, far inside the 30 Nm rating. |
| 9 to 13 Nm (MOZA R9, R12) | Yes. A MOZA R9 or R12 uses less than half of the stated limit. |
| 16 Nm and up (MOZA R16 and R21 Ultra, Simagic Alpha EVO Pro) | Yes up to 30 Nm: a MOZA R16 Ultra, R21 Ultra or Simagic Alpha EVO Pro (18 Nm) is inside the figure Trak Racer states. |
Looking the other way, from the base to the frame? See which cockpit each direct drive base needs.
What's in the box, and what you'll add
- TR8 Pro V2 frame in black or grey
- Seat slider rails
- Oversized seat brackets
- Gear shifter mount
- Sliding wheel mount
| You will also need | Cost | Note |
|---|---|---|
| Seat | $254.15 | Trak Racer RE2 reclining seat on Nov 21, 2026; GT Pro fiberglass bucket $296.65 |
| Single monitor stand | $92.65 | Cockpit-mounted stand for the TR8 Pro on Nov 21, 2026, list $109 |
| Wheel base and pedals | from $269 | MOZA R9 base on Nov 21, 2026, wheel and pedals extra |
Frame, RE2 seat and the single monitor stand came to $940.95 on Nov 21, 2026. The slider rails are already in the box, so nothing else is needed to sit down and drive.
TR8 Pro or TR160: which Trak Racer for a strong base?
| TR8 Pro V2 | TR160 V5 | |
|---|---|---|
| Frame | 2-inch steel tube | 160 x 40 mm aluminum profile |
| Price on Nov 21, 2026 | $594.15 (list $699) | $620.50 (list $730) |
| Stated torque support | Up to 30 Nm | No figure published |
| Seat slider | Included | Included |
| Assembly | About 45 minutes per Trak Racer | Not stated |
| Add-ons | Mounts made for the TR8 Pro | Any 8 mm slot accessory, 30-plus listed |
For $26 more the TR160 gives you profile and the upgrade freedom that comes with it. The TR8 Pro answers with a number and a faster build. If you know your base will stay under 30 Nm and you want to be driving the same evening, the tube frame is the simpler buy.

What do owners say on the store page?
Trak Racer shows buyer reviews under the product. Three we read on Nov 21, 2026 are useful because they are specific. One buyer running a 25 Nm base wrote there was "no noticable flex even at 100%". Another called it a "solid, sturdy and heavy rig with very little flex" and added that it "takes a while to build" once you bolt your own parts on. A third reported "a few small bends and scratches on delivery" and said Trak Racer resolved it. Store-hosted reviews are moderated by the seller, so read them as a sample, not a survey.
How long does the build take?
The product summary says "extremely rigid and fast, 45-minute assembly", and the description gives a 30 to 60 minute range. That is frame time. Mounting a base, pedals and a seat to your own measurements is where the evening goes, as the buyer above noted.

What we could not confirm
- Footprint and weight. The Shopify shipping weight is not a product weight, so we left it out.
- Warranty length for the TR8 Pro V2: not stated on the page.
- Which seat the black and the grey frame are pictured with; both colors were the same price.
How it compares with close rivals
| Spec | Trak Racer TR8 Pro | Trak Racer TR160 | Sim-Lab GT1 Evo | Playseat Trophy |
|---|---|---|---|---|
| Score | 8.2/10 | 8.3/10 | 9.6/10 | 8.5/10 |
| Price | $594.15 on Nov 21, 2026 | $620.50 on Nov 21, 2026 | $449 on Nov 21, 2026 | $549 on Nov 21, 2026 |
| Type | Steel tube | Aluminum profile | Aluminum profile | Steel tube |
| Seat | Not included | Not included | Not included | Included |
| Folds | No | No | No | No |
| Stated torque support | 30 Nm | No figure published | 40 Nm | No figure published |
| Footprint L x W x H | Not stated | Not stated | 53.1 x 22.8 x 26 in (135 x 58 x 66 cm) | 55.1 x 22.8 x 39.4 in (140 x 58 x 100 cm) |
| Weight | Not stated | Not stated | 86 lb (39 kg) | 35 lb (16 kg) |
| Driver height | Not stated | Not stated | Up to 7 ft 3 in | 3 ft 11 in to 7 ft 3 in |
| Max driver weight | Not stated | Not stated | 397 lb | 269 lb |
| Buy | Check price at Trak Racer | Check price at Trak Racer | Check price at Sim-Lab | Check price at Amazon |
Price on November 21, 2026
Trak Racer listed the Trak Racer TR8 Pro at $594.15 on November 21, 2026, next to a list price of $699. Sale price shown on trakracer.com. Prices change, sometimes within the week, so the button shows today's price at the seller.
Full spec sheet
| Spec | Trak Racer TR8 Pro V2 |
|---|---|
| Type | Steel tube |
| Frame | 2-inch steel tube |
| Seat | Not included |
| Folds | No |
| Driving position | GT |
| Stated torque support | 30 Nm |
| Footprint L x W x H | Not stated |
| Floor area | Not stated |
| Folded size | Does not fold |
| Weight | Not stated |
| Driver height | Not stated |
| Max driver weight | Not stated |
| Warranty | Not stated on the product page |
| Sold by | Trak Racer |
Questions buyers ask
How much torque can the Trak Racer TR8 Pro handle?
Trak Racer states that the 2-inch tube was strengthened to withstand up to 30 Nm of direct drive torque without flex.
Does the TR8 Pro include a seat?
No. It includes seat slider rails and oversized seat brackets. A Trak Racer RE2 reclining seat was $254.15 on Nov 21, 2026.
How long does the TR8 Pro take to assemble?
Trak Racer quotes about 45 minutes, within a 30 to 60 minute range, for the frame.
Is steel tube worse than aluminum profile?
Not for stiffness at this rating. The difference is adjustability: profile accepts any slot accessory anywhere, a tube frame accepts the mounts designed for it.
Keep comparing
Scores come from a public formula applied to maker-published specs and dated prices. Some links are affiliate links; see the affiliate disclosure.



